1/12

PureTrekker Air Mattress

A self-inflating sleeping pad that's ready before you've finished pitching the tent. No pump to carry, no lung capacity required, no lying on the cold ground wondering why you bothered.

Free shipping over $100 · in 7-12 business days · 30-day returns

SELF-INFLATING

BUILT-IN PILLOW

PUNCTURE RESISTANT

PACKS SMALL

Sleep comfortably without carrying extra gear. The PureTrekker Air Mattress inflates using just your foot or hand, no separate pump required, and packs down to the size of a water bottle when you're done. A hexagonal air chamber design keeps you stable and off the cold ground, while the durable TPU-coated nylon resists tears and punctures on rocky or uneven terrain. The attached pillow inflates separately, so you can adjust firmness independently from the pad.

Open the valve. Twist and pull the main air valve open.
Press it in. Use your hand or foot to press the valve repeatedly - about 60 seconds gets it fully firm.
Inflate the pillow. Open the separate pillow valve and blow it up to your preferred softness.
Deflate and roll. Open the valve, roll from the far end, and it packs back down to pouch size.

That's it - no pump, no batteries, no waiting around.

1x PureTrekker Air Mattress with built-in pillow
1x Carry pouch

Size: 74.8 x 23.6 x 1.9 in (190 x 60 x 5 cm)
Packed size: 10.2 x 3.9 in (26 x 10 cm)
Weight: 1.3 lb (600g)
Material: 40D nylon, TPU coating
Inflation: Foot or hand, built in, no pump needed
Pillow: Built in, inflates on a separate valve
Valve system: Dual valve - one for inflation, one for deflation
Design: Hexagonal air chambers for stable support

Shipping

Orders are processed within 1 – 3 business days
Transit time typically takes 6 – 9 business days
A tracking number is emailed as soon as your order ships

Returns

30-day return window from the date of delivery
Item must be unused and in its original packaging
Contact our support team to start a return
Refunds are issued within 10 business days of inspection

You can visit our Shipping page and our Return page for more details.

Wipe down with a damp cloth after each use, especially after sand or mud
Let it air dry completely before rolling it up - don't pack it away wet
A footprint or groundsheet under the pad adds extra protection against sharp rocks or debris
Store loosely rolled rather than tightly compressed if it'll sit unused for a while
Check both valves are fully sealed before inflating to avoid slow leaks

HOW IT INFLATE

One Valve. Sixty Seconds. Real Sleep.

The Air Mattress does one job: turn sixty seconds of pressing a valve into a real night's sleep off the ground, wherever you've pitched the tent. You don't need a pump, a car battery, or patience you don't have left after a full day of hiking.

60 sec

Inflation time

10.2 in

Packed size

1.3 lb

Light and compact

Foot pump

Built in, no extra gear

WHAT YOU'RE ACTUALLY PAYING FOR

Four Reasons It's Worth the Space in Your Bag

01

Built in pump

You're not digging through your pack for a separate hand pump or checking if a battery-powered one still has charge. Step on the valve, lift, repeat - the built-in one-way valve does the rest.

02

Packs down to nothing

Rolled up, it's about the size of a water bottle. It rides in a side pocket without you noticing it's there until you need it.

03

Built to handle the ground

40D nylon with a TPU coating shrugs off rocks, roots, and whatever else is under the tent floor.

04

Skip Packing a Separate Pillow

It's built right into the pad, so you're not carrying an extra pillow or bunching up a jacket at 2am.

FEATURE SPOTLIGHT

Notice the Small Stuff

Feel Every Chamber Working

Individual air pockets keep you stable instead of rolling toward the middle like a pool float, and they isolate you from the cold ground better than one big air pocket would.

Air Goes In. It Doesn't Come Back Out.

The valve's two-layer design makes it easy to pump air in but hard for it to leak back out - so you're not losing pressure while you sleep.

WHO IT'S FOR

See If This Is Actually for You

WHERE PEOPLE ACTUALLY USE IT:

Backpacking trips where every ounce counts
Car camping when you don't want the bulk of a foam pad
Road trips and van life sleeping setups
Festival camping

ALSO COMES IN HANDY FOR:

Guest bed in a small apartment
Backyard sleepovers
Emergency kits
Beach naps

HOW IT WORKS

Set It Up Without the Headache

01

Open

Open the inflation valve.

02

Step

Cover it with your foot, step down and lift, repeat for about 60 seconds.

03

Seal

Close the valve to lock the air in.

04

Lie down

That's the whole process.

SPECS

The full spec sheet.

Size

74.8 x 23.6 x 1.9 in (190 x 60 x 5 cm)

Packed size

10.2 x 3.9 in (26 x 10 cm)

Weight

1.3 lb (600g)

Material

40D nylon, TPU coating

Inflation

Built-in foot pump

Pillow

Built in

Valve system

One valve, two layers

Design

Hexagonal air chambers for stable support

IN THE BOX

Everything you need, nothing you don't.

1x PureTrekker Air Mattress with built-in pillow

1x Carry pouch

THE COMPARISON

Skip the Foam Pad

	PureTrekker Air Mattress	Foam Sleeping Pad	Manual-Pump Air Mattress	Bare Ground
Comfort off the ground	✓	Minimal	✓	✗
Setup time	60 seconds	Instant, but bulky to carry	5-10 minutes	Instant
Packs small	✓	Bulky, straps to a pack	✗	N/A
No extra gear needed	✓	✓	Pump required	✓
Insulation from cold ground	✓	Some	✓	✗

Swipe to see more →

FAQs

Questions, answered plainly.

There's no separate pump to buy or carry - cover the built-in valve with your foot and step down and lift repeatedly, about 60 seconds, to inflate it.

About 60 seconds of steady stepping.

It's built into the pad and fills through the same valve, so it inflates right along with the rest of the mattress - no separate step needed.

The 40D nylon with TPU coating resists tears, though a footprint or groundsheet adds extra protection on sharp terrain.

Wipe down with a damp cloth and let it fully air dry before rolling it up for storage.